Lamson Heavy Draw straight oils are divided into two categories, chlorine based straight oils and chlorine free straight oils. All of our straight oil products are designed for use in any type of metal stamping application and can be used in wash systems which skim out oil. We use only the highest quality additives to ensure the ultimate in tool life, rust protection, and employee acceptance. In most cases the heaviest applications can be accomplished with or without the use of chlorine.
These oils were the first types of lubricants used in the stamping industry and are still widely used today. They are reliable and economical. Shown below are just a few of our complete line of chlorine based straight oils.
Light duty stamping oil
An economical lubricant recommended for light to medium punching, piercing, and blanking. Its unique formulation makes it ideal for drawing thick material (from .010 to .070 inches thick).
Economical heavy duty stamping oil
A medium viscosity lubricant for moderate applications with easy removal. Recommended for punching, piercing, and blanking.
Heavy duty stamping oil
A heavy-duty lubricant for deep draw applications (including stainless steel) and severe punching, piercing, and blanking. Contains emulsifying agents to enable easy removal with an alkaline cleanser.
Heavy duty punching oil
Designed specifically for punching of extremely thick metals. This oil contains special tackiness agents that guarantee firm oil adhesion to the punch.
Heaviest duty stamping oil
A chlorinated honey-type compound, excellent on stainless steel and capable of performing the toughest jobs. Can be thinned with mineral spirits.