Straight Oils

Lamson HeavyDraw straight oils are divided into two categories:

Chlorine Based Straight Oils
Chlorine Free Straight Oils

All of our straight oil products are designed for use in any type of metal stamping application and are compatible with wash systems which skim out oil. We use only the highest quality additives to ensure the ultimate in tool life, rust protection, and employee acceptance. In most cases, the heaviest applications can be accomplished with or without the use of chlorine.

These oils were the first types of lubricants used in the stamping industry and are still widely used today. They are reliable and economical. Shown below are just a few of our complete line of straight oils.

Chlorine Based

Often included as an extreme pressure additive to enhance performance, chlorine based oils are one of the most commonly used metalworking fluids due to its cost performance.

HEAVYDRAW 1105
Light duty stamping oil

An economical lubricant recommended for light to medium punching, piercing, and blanking. Its unique formulation makes it ideal for drawing thin material (from .010 to .070 inches thick).

HEAVYDRAW 1110
Economical heavy duty stamping oil

A medium viscosity lubricant with easy removal for moderate applications. Recommended for punching, piercing, and blanking.

HEAVYDRAW 1125
Heavy duty stamping oil

A heavy-duty lubricant for deep draw applications (including stainless steel) and severe punching, piercing, and blanking. Contains emulsifying agents to enable easy removal with an alkaline cleanser.

HEAVYDRAW 1130
Heavy duty punching oil

Designed specifically for punching of extremely thick metals. This oil contains special tackiness agents that guarantee firm oil adhesion to the punch.

HEAVYDRAW 1150
Heaviest duty stamping oil

A chlorinated honey-type compound, excellent on stainless steel and capable of performing the toughest jobs. Can be thinned with mineral spirits.

Chlorine-Free

Chlorine-free oils are safe to use on most types of metals when free of sulfur. Because they do not decompose in high humidity or extreme heat, and do not discolor steel, brass or copper parts, they bring benefits when they replace a chlorine-based oil.

HEAVYDRAW 1219
Light duty stamping oil

A medium viscosity lubricant formulated for stamping and deep drawing (up to .125 inches). Ideal for most jobs in the punch press department.

HEAVYDRAW 1220
Medium duty punching oil

A medium viscosity lubricant formulated for use on steel and stainless steel. It is recommended for stamping and drawing (up to 1 inch), heavy punching, piercing and blanking applications. Not recommended for use with carbide dies.

HEAVYDRAW 1290
Heavy duty drawing

A medium viscosity lubricant formulated for the heaviest drawing and stamping applications. A product that can do most of the heavy stamping.


Straight Oils Comparison Chart
	Chlorine Based					Chlorine-Free
METAL	1105	1110	1125	1130	1150	1219	1220	1290
Steel
Stainless Steel
Aluminum
Brass
Zinc
GAGE
Light: .001 to .040
Medium: .040 to .085
Heavy: .085 to Plate
OPERATION
Blanking
Drawing
Punching
Extruding
Perforating
Swaging